home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Mac Power 1997 October
/
MACPOWER-1997-10.ISO.7z
/
MACPOWER-1997-10.ISO
/
AMUG
/
BUSINESS
/
ReminderPro 3.3.sit
/
ReminderProョ 3.3
/
Documents
/
About the System Extension
< prev
next >
Wrap
Text File
|
1997-05-26
|
2KB
|
71 lines
--------------------------------------------------------
REMINDERPRO 3.3 : SYSTEM EXTENSION
--------------------------------------------------------
WHERE IT RESIDES
----------------
The ReminderPro system extension file (also called the "Init")
must reside inside the Extensions folder which is inside the
System folder.
WHAT IT DOES
------------
The ReminderPro system extension works in the background
continuously to display reminders at the appropriate times.
While you use the ReminderPro application to schedule reminders,
it is the system extension that displays the reminders.
ACCELERATED FOR POWER MACINTOSH
-------------------------------
The ReminderPro 3.3 system extension will run on 68K and
Power Macintosh computers. When running on a Power Macintosh,
it will automatically run the accelerated version.
TROUBLESHOOTING MEMORY ERROR MESSAGES
-------------------------------------
The ReminderPro 3.3 system extension can generate one of the following
error messages when it runs out of memory:
MESSAGE 1:
The ReminderPro extension is out of memory.
You will not be able to snooze reminders!
MESSAGE 2:
The ReminderPro extension did not load as it was not able to
read the reminder database file. It may have run out of memory.
MESSAGE 3:
The ReminderPro extension did not load as it was not able to
read the snooze database file. It may have run out of memory.
These messages are received if you have a lot of reminders.
The ReminderPro system extension reserves memory for certain
number of reminders. If you reach the limit, the extension
needs to be reconfigured for more number of reminders.
Following are the steps to increase the extension memory.
1) Launch the ReminderPro application.
2) Hold down the option key and pull down the "Customize" menu.
3) Select "Extension Configuration" from the "Customize" menu.
4) Increase the parameter named "Init Zone Size" by 40 Kbytes.
(Add 40 Kbytes to whatever is there).
5) DO NOT CHANGE ANYTHING ELSE.
6) Save the changes.
7) Restart your computer since this change takes effect only
upon restart.
If the problem persists, contact Crystal Software, Inc..